Sheet-Fed 3ply 1.97/1.70mm Thickness Thickness Offset Printing Rubber Blanket
1. Application
EcooGraphix Printing Blanket is suitable for printing of coated papers, carton boards and the like. So the finish products of whole offset printing would be carton, coated paper, newspaper, magazine, and so on.
2. Characteristic
1) High cost-effective. Our most economic blanket model as well as most popular seller. Could satisfy 85% printing jobs.
2) High compressive ability, which allows many types and printing material in different thickness.
3) Wide range printing, prefer package printing on carton in moderate speed, speed about 9000 prints/hour.
4) Be excellent in the action of absorbing a shock such as a mechanical impact.
5) Prevent the material to be printed from winding around the blanket cylinder.
3. Structure
The printing blanket normally includes 3 layers as below:
A: a base non-woven fabric or a spun bonded non-woven fabric layer which is assigned to the printing cylinder,
B: a soft, highly resilient void-free compressible intermediate rubber layer which has closed gas pores
C: an outer-lying void-free layer of an elastomeric layer which faces toward the printing material.
Construction:
3/4 ply
Thickness:
1.97/1.70±0.02 mm
Color:
Blue/Green
Compressible layer:
Microspheres
Surface:
Micro-ground and polished
Roughness:
0.8-1μm
Hardness:
76-80 Shore A
Elongation:
≤ 1.0%
Tensile strength:
≥ 85
Characteristic:
Moderate compressibility avoids moving image of machine and reduces the edge marking.
Wide-ranging print. Prefer to carton print and full mold print.
| Model | ECOO-BL-5000 |
| Construction | 3/4 ply |
| Thickness | 1.97/1.70±0.02 mm |
| Color | Blue/Green |
| Compressible Layer | Microspheres |
| Surface | Micro-ground and polished |
| Compressibility | Microspheres |
| Roughness | 0.8-1μm |
| Hardness | 76-80 Shore A |
| Elongation | ≤1.0% |
| Tensile strength | ≥85 N/mm |
| Application | Strong universality; Appropriate to dot and word printing. Speed about 15000 prints/hour. |
| Characteristic | Moderate compressible avoids moving image of machine and reduces the edge marking. Wide-ranging print. Prefer to carton print and full mold print |
More details
About Blanket Aluminum Bar
We can offer blanket with or without bar, depending on customers' inquiry. $5 will be surcharged for each pair of bars. Please let us know the machine model or bar size if you need blanket with bars.
Dimension, Blanket Back printing, Package
We offer blanket in any sizes in sheet or in roll as below. The blankets will be rolled and packed in polymer bag and carton with enough protective layers. The customer can decide the content of back side, usually the logo or size.
Before installation, please measure the thickness of blanket for adjusting the press accurately;
While installation, please use the constant wrench to tighten gradually;
After installation, please clean the rubber surface and ready for print;
During the use, please often use the special solvent to clean the rubber surface for extending the useful time.
FAQ
Q1: Do you offer free sample? How long is the sample time of the shipping? Does the sample fee can be returned?
Since blanket is high value, we did not offer free sample. But we can offer favorable discount. It will take 5 days to prepare sample. If you place bulk order after sample testing, we will refund the sample fee and courier cost.
Q2: How long can I expect to get the sample?
The sample will be ready for delivery in 3-5 days and will be sent via international express such as DHL, UPS, TNT, FEDEX and would be arrived within 3-5 days.
Q4: How about lead time?
The lead time for sample order is 5 days and for bulk order is normally 20 days. If there is special requirement, lead time will be negotiated on detailed case.
Q5. Payment term
Normally, 30% deposit, 70% before shipping.
